The aluminum plate finally arrived after a shipping mix up. I cut and drilled it and the mounting plate for the motor. I found that I will need to shorted the transmission shaft or space the motor off the mounting plate 1/2 inch. I decided to cut the shaft being easier and faster.
I also had to drill out the locating dowels for the plate so the bolts will pass through them.
All that is needed is some new bolts and drill the frame for the middle motor mount.
I also had to drill out the locating dowels for the plate so the bolts will pass through them.
All that is needed is some new bolts and drill the frame for the middle motor mount.
No comments:
Post a Comment